Inconel suppliers
Inconel Nickel Alloy Stockist
Find Inconel suppliers UK, USA, Singapore or Australia. We have the largest network to supply Inconel Material at best Price.
Table of contents
Inconel suppliers in Mumbai, India
Inconel® is a registered trademark (of Special Metals Corporation) referring to a family of austenitic nickel-chromium super alloys.
Looking for Inconel suppliers in USA, UK, Canada, Singapore, Australia, South Africa or Indonesia? Your single source for all type Inconel Alloys.
Inconel is a family of austenitic nickel-chromium-based superalloys. Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack.
Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel material is a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel® is typically used in high temperature applications.
Looking to buy Alloy 600 Tubing? Inconel 600 Tubing?
Inconel alloy Grades
Steel Tubes India (A govt. of India Recognised Export House) is a leading stockist & supplier of Aircraft Materials, Inconel Material Grades and Inconel in India. Click on below links for Inconel Grades, Price in India.
Inconel Material suppliers
- Inconel 600 suppliers
Solid solution strengthened.
- Inconel 601 suppliers
- Inconel 625 suppliers
Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
- Inconel 718 suppliers
Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
- Inconel X750 suppliers
Commonly used for gas turbine components, including blades, seals and rotors.
- Inconel 907 suppliers
- Inconel 909 suppliers
- Inconel 706 suppliers
- Inconel 617 suppliers
- Inconel 751 suppliers
Increased aluminium content for improved rupture strength in the 1600 °F range.
- Inconel 792 suppliers
Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
- Inconel 939 suppliers
Gamma prime strengthened to increase weldability.
- Inconel 188 suppliers
Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
- Inconel 690 suppliers
Low cobalt content for nuclear applications, and low resistivity.
- Inconel 713C suppliers
Precipitation hardenable nickel-chromium base cast alloy.
- Inconel 230 suppliers
Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.
Inconel density & Inconel Properties
Inconel Tensile Strength
Physical Properties | Metric | English | |
Alloy 600 | Density | 8.47 g/cc | 0.306 lb/in³ |
Alloy 625 | Density | 8.44 g/cc | 0.305 lb/in³ |
Alloy 718 | Density | 8.19 | 0.296 lb/in3 (8.192 g/cm3) |
Inconel Alloy 625 Density*. 8440 [kg · m-3]
Inconel Alloy 625 Density: 0.303 lb/in3 (8.44 g/cm3)
Inconel Electrical Conductivity
| Material | Conductivity | Resistivity | Notes | |
|---|---|---|---|---|
| (% IACS) | (Siemens/m) | (Ohm-m) | ||
Inconel 600 | 1.70 | 9.860E+05 | 1.014E-06 | conductivity converted from resistivity |
Inconel 600 | 1.67 |
| 1.030E-06 | conductivity converted from resistivity |
Inconel 601 | 1.45 |
| 1.190E-06 | conductivity converted from resistivity |
Inconel 617 | 1.41 |
| 1.220E-06 | conductivity converted from resistivity |
Inconel 625 | 1.34 |
| 1.290E-06 | conductivity converted from resistivity |
Inconel 690 | 11.65 |
| 1.480E-07 | conductivity converted from resistivity |
Inconel 718 | 1.38 |
| 1.250E-06 | conductivity converted from resistivity |
Inconel X750 | 1.41 |
| 1.220E-06 | conductivity converted from resistivity |
Inconel Hardness
Inconel Rockwell Hardness, Inconel Strength
Material | Hardness HB |
|---|---|
Alloy 625 Bar | ≤ 287 HB |
Alloy 625 Sheet | 145-240 |
Alloy 625 Tube | – |
Alloy 600 rod and bar | 65-85B |
Alloy 600 Plate | 65-85B |
Alloy 600 Sheet | 88B max |
Alloy 600 Tube and Pipe | 88B max |
Alloy 600 Wire | – |
Alloy 600 Wire | – |
Alloy 600 Wire | – |
Inconel Heat Treatment
Heat Treatment Alloy 600 | Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled. |
Heat Treatment Alloy 625 | Alloy 625 has three basic heat treatments: (1) High Solution Anneal – 2000/2200°F (1093/1204°C), air quench or faster. (2) Low Solution Anneal – 1700/1900°F (927/1038°C), air quench or faster. (3) Stress Relieve – 1650°F (899°C), air quench. |
Heat Shield | Inconel (2200 deg F continuous). |
Inconel Low Temperature
Alloy 718 | temperature ranges from cryogenic up to 1400°F |
Alloy 625 | temperatures ranging from cryogenic to 2000°F |
Inconel Melting Point
Alloy 718 Melting Range | Solution Treated: 2500-2600°F Solution Treated and Aged: 1370-1430°C |
Alloy 600 Melting Range | Metric: 1354 – 1413 °C English: 2470 – 2580 °F |
Alloy 625 Melting Range | 2350 – 2460°F (1280 – 1350°C) |
Inconel Thermal Conductivity
Thermal Properties and Expansion
Alloy 600 Thermal Conductivity | Metric: 14.9 W/m-K |
Alloy 625 Thermal Conductivity | Metric: 9.8 W/m-K English: 68 BTU-in/hr-ft²-°F |
Alloy 600 Heat Capacity | Metric: 0.444 J/g-°C |
Alloy 625 Heat Capacity | Metric: 0.41 J/g-°C English: 0.098 BTU/lb-°F |
Inconel composition and uses
Inconel composition and uses are that they are 20 super alloys which have a base of chromium and austenitic nickel. This composition of Inconel alloys is exceedingly resistant to extreme temperatures and oxidation. Inconel alloys have a high resistance to corrosion in high or very low temperatures. In high temperatures, Inconel forms a solid oxide coating, which makes the surface highly resistant to corrosion. Inconel alloys are used in chemical industry, food processing industry, aerospace industry, marine engineering industry, hydraulic line tubing, heat-exchanger tubing, propulsion motors, etc.
Typical Mechanical Properties of Inconel
Inconel Machinability and Inconel Yield Strength
Material | Form and Condition | Tensile Strength | Yield Strength | Elongation % | Hardness, Rockwell | ||
|---|---|---|---|---|---|---|---|
ksi | MPa | ksi | MPa | ||||
Alloy 600 rod and bar suppliers | Cold drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 65-85B |
Alloy 600 Plate suppliers | Hot rolled Annealed | 80-100 | 550-725 | 30-50 | 205-345 | 55-35 | 65-85B |
Alloy 600 Sheet suppliers | Cold Rolled Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 55-35 | 88B max |
Alloy 600 Tube and Pipe suppliers | Cold Drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 88B max |
Alloy 600 Wire suppliers | Cold Drawn Annealed | 80-120 | 550-830 | 35-75 | 240-520 | 45-20 | – |
Alloy 600 Wire suppliers | Cold Drawn No 1 Temper | 105-135 | 725-930 | 70-105 | 480-725 | 35-15 | – |
Alloy 600 Wire suppliers | Spring Temper | 170-220 | 1170-1520 | 150-210 | 1035-1450 | 5-2 | – |
Alloy 625 Bar suppliers | Annealed | 120 | 827 | 60 | 414 | 30 | ≤ 287 HB |
Alloy 625 Sheet suppliers | Annealed | 120 | 827 | 60 | 414 | 30 | 145-240 |
Alloy 625 Tube suppliers Seamless and Welded | Annealed | 120 | 827 | 60 | 414 | 35 | – |
Inconel Material Weight Calculator
Click on below for Weight Calculator
- Pipe Weight Calculator
- Sheet Weight Calculator
- Fasteners Weight Calculator
- Screw Thread Calculator
- Fittings Weight Calculator
- Flanges Weight Calculator
- Round Bar Weight Calculator
- Angle Weight Calculator
- Channel Weight Calculator
- Beam Weight Calculator
- Wire Weight Calculator
Inconel UNS Number
- ASTM B163 UNS N08800
- ASTM B163 UNS N08800
- ASTM B163 UNS N08825
- ASTM B163 UNS N08825
- ASTM B163 UNS N06601
- ASTM B163 UNS N06690
- ASTM B163 UNS N06690
- ASTM B423 UNS N06845
- ASTM B444 UNS N06625
- ASTM B622 UNS N06022
- ASTM B409 UNS N08800
- ASTM B409 UNS N08810
- ASTM B424 UNS N08825
- ASTM A240 UNS N08800
- ASTM A240 UNS N08810
- ASTM A240 UNS N08810
- ASTM B168 UNS N06601
Inconel Uses and Applications
Inconel Alloys are resistance to extreme temperatures and its ability to retain enough strength at high temperatures, it is the ideal basket material for heat treat applications.
- Jet Engines
- Marine applications
- Aerospace industries
- Sea-water applications etc.
Inconel Ultrasonic Velocity
Inconel Ultrasonic Testing
| Material | in/sec | m/sec |
| INCONEL | 224400 | 5699.76 |
Inconel Welding
Inconel welding can be hard, as the welds that are created, tend to crack. Welding can be done using only some specific alloys which are appropriate for welding. The most widely used method for Inconel welding is known as TIG (tungsten inert gas). Even though Inconel welding, using tungsten inert gas is difficult to execute, this is one of the best ways to weld Inconel. Tungsten inert gas method of welding, provides the welder with more ability to weld, than any other welding method. There is another method for Inconel welding which is fast gaining popularity and it is known as pulsed micro laser welding.
TIP TIG inconel 800 pipe welded with inconel 82 wire on 10 inch pipe 3/4 wall.
(welded with lowest possible weld heat).
The TIP TIG weld cycle time for the inconel pipe was 40 – 50 minutes and would be reduced further if reduced Vee groove preps were utilized. The customer used to take around 4 hrs with regular TIG. When your weld process can weld a complex incoloy pipe and make the welds look simple, that’s a process that should be given consideration.
With TIP TIG, no brushing, no grinding, no spatter, no weld rework, no feeding a wire, no foot control, less skills. Note weld smoke prep machining lubricants.
Also read:
- Difference Between Low-Alloy Steel & High-Alloy Steel
- Differences Between 52100 & E52100 Steel
- Differences Between 304 and 316 Stainless Steel
- Differences Between A358 and A312
- Difference Between Inconel and Incoloy
- Difference Between Monel and Inconel
- Difference Between Hastelloy and Inconel
- Difference Between Inconel 625 and 825
- Difference Between Inconel 600 and 625
- Difference Between Inconel 625 and 718
- Difference Between Monel 400 and 500
- Difference Between Inconel and Monel
- Difference Between Inconel 600 and 601
- Difference Between Inconel 600 and 800
- Difference Between Inconel and Stainless Steel
- Difference Between Inconel and Nimonic
- Difference Between Inconel and Titanium
- Difference Between Duplex and Inconel
- Difference Between Inconel 625 and Incoloy 625
- Difference Between Inconel 825 and Incoloy 825
- Difference Between Inconel 800 and Incoloy 800
- Difference Between Inconel X750 and Inconel 718
- Difference Between Monel and Inconel 625
- Difference Between Nickel and Inconel
- Difference Between Inconel 600 and 718
- Difference Between Inconel 825 and 925
- Difference Between Inconel 825 and 925
Inconel Galvanic Corrosion
A galvanic series in sea water is proves that Inconel alloy 625 to be very noble com-pared to many of the other alloys. Thus, inconel alloy 625 will usually behave as a cathode when in contactwith other materials in sea water.
Inconel For Sale
Looking for a reliable supplier for Aerospace Structural Materials? Steel Tubes India is an ISO certified & Govt. recognised Export House. We provide Aerospace Manufacturing Raw Materials in UK.
| ITEM | BRAND | SIZE |
|---|---|---|
| Inconel alloy suppliers | Inconel 600 Inconel 601 Inconel 625 Inconel 718 | Plate:3.0~60.0mm (THK) *1000mm (WIDTH) *2000mm (LENGTH) Bar:Round:Φ5.5~250mm;Square:40~240mm*40~240mm Wire:Φ0.1mm~18mm Strip:0.1~3.0mm(THK)*≤ 420mm (WIDTH) Seamless pipe:6mm~219mm(OD)*0.5mm~18mm(WT) Welded tube:1mm~120mm(OD)*0.1mm~10mm(WT) U Shape pipe: 10mm~40mm (OD)*0.5-5mm (WT) Flange: 3/8” ~48” (DN10 ~DN1200) Tee: 1/2”~48”* SCH 5-SCH160/XXS(WT) |
| Monel alloy suppliers | Monel 400 Monel K500 | |
| Nickel 52 | ||
| Nickel alloy suppliers | Nickel 200 | |
| Nickel 201 | ||
| Hastelloy C276 | ||
| Hastelloy alloy suppliers | Hastelloy C22 | |
| Hastelloy B2 | ||
| Hastelloy X | ||
| Invar alloy suppliers | Invar 36 | |
| Kovar alloy suppliers | Kovar 29 | |
| Incoloy 800 | ||
| Incoloy 800H | ||
| Incoloy alloy suppliers | Incoloy 800HT | |
| Incoloy 825 |
What type of alloy is Inconel?
The answer to what type of alloy is inconel?, is that this belongs to a family of super alloys that are austenitic and are comprised of nickel-chromium. There are various types of Inconel alloys such as Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel 722, Inconel 750, Inconel 800, Inconel 825, etc. Inconel alloys show an enormous resistance to corrosion and oxidation. At extreme temperatures, Inconel alloys display exceptional creep resistance and mechanical strength. Applications where tremendous surface stability is often necessary, Inconel alloys are used, as it can handle very high stress at an extremely high temperature.
FAQ: Inconel is Ferrous Or Nonferrous metal
Best Answer: Inconel is Non ferrous because it consists mostly of Nickel with only a small amount of Iron in its chemistry.
Inconel Price in India: US $10-12 per Pound
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70