Invar 42 supplier
Invar 42 price in India
Alloy 42 material and Invar 42 Products dealers & distributor in Mumbai, India
Table of contents
- Invar 42 Suppliers
- Invar 42 Price Per Kg
- Invar 42 Specification
- Invar 42 Composition
Invar 42 Suppliers
Alloy 42 Suppliers in Mumbai, India
Invar 42 Pipe
Invar 42 Tube
Invar 42Tubing
Invar 42 Sheet
Invar 42 Plate
Invar 42 Round Bar
Looking to buy Invar 36? Invar 42?
Check Today’s price of Invar 36 and Invar 42 in India
Invar 42 Price Per Kg
Invar 42 Price | Origin | Price in INR (per kg) | Price in USD (per kg) | Price in Euro (per kg) |
|---|---|---|---|---|
Invar 42 Price in India | Indian | Rs 2800 – 2900/- as per your requirement sizes | $40 | €34 |
Invar 42 Price in Japan | Japanese | Rs 3600 – 3700/- as per your requirement sizes | $53 | €45 |
Invar 42 Price in UK / Europe | European | Rs 4100 – 4200/- as per your requirement sizes | $29 | €25 |
Invar 42 Price in USA | USA | Rs 4600 – 4700/- as per your requirement sizes | $31 | €26 |
Iron-Nickel Alloys / Nickel-Iron Alloys Invar 42 Equivalent Grades
Alloy | DN-Trade Name | WERKSTOFF NR. | UNS-No. | ASTM Specification | DIN Specification |
|---|---|---|---|---|---|
Ni 42 | Dilaton 41 | K94100 | ASTM F30 | ||
Ni 42 | Dilaton 42 | 1.3917 | DIN 17745 / SEW 385 |
Super Invar 42 Chemical Composition
Grade | C | Mn | P | S | Si | Ni | Cr | Fe |
|---|---|---|---|---|---|---|---|---|
Invar 42 | .50 max | .40 max | – | .20 max | – | 41.0 | .- | Bal |
Invar Composition
Invar – Nickel Iron Alloy
| Material Property | Minimum Value (S.I.) | Maximum Value (S.I.) | Units (S.I.) | Minimum Value (Imp.) | Maximum Value (Imp.) | Units (Imp.) |
|---|---|---|---|---|---|---|
| Atomic Volume (average) | 0.0068 | 0.0071 | m3/kmol | 414.961 | 433.268 | in3/kmol |
| Density | 8.1 | 8.2 | Mg/m3 | 505.667 | 511.91 | lb/ft3 |
| Energy Content | 50 | 200 | MJ/kg | 5416.93 | 21667.7 | kcal/lb |
| Bulk Modulus | 106 | 112 | GPa | 15.374 | 16.2442 | 106 psi |
| Compressive Strength | 240 | 725 | MPa | 34.8091 | 105.152 | ksi |
| Ductility | 0.06 | 0.45 | 0.06 | 0.45 | ||
| Elastic Limit | 240 | 725 | MPa | 34.8091 | 105.152 | ksi |
| Endurance Limit | 185 | 405 | MPa | 26.832 | 58.7402 | ksi |
| Fracture Toughness | 120 | 150 | MPa.m1/2 | 109.206 | 136.507 | ksi.in1/2 |
| Hardness | 1200 | 2400 | MPa | 174.045 | 348.091 | ksi |
| Loss Coefficient | 0.0003 | 0.0011 | 0.0003 | 0.0011 | ||
| Modulus of Rupture | 240 | 725 | MPa | 34.8091 | 105.152 | ksi |
| Poisson’s Ratio | 0.28 | 0.3 | 0.28 | 0.3 | ||
| Shear Modulus | 54 | 58 | GPa | 7.83204 | 8.41219 | 106 psi |
| Tensile Strength | 445 | 810 | MPa | 64.5418 | 117.481 | ksi |
| Young’s Modulus | 137 | 145 | GPa | 19.8702 | 21.0305 | 106 psi |
| Glass Temperature | K | °F | ||||
| Latent Heat of Fusion | 270 | 290 | kJ/kg | 116.079 | 124.677 | BTU/lb |
| Maximum Service Temperature | 600 | 700 | K | 620.33 | 800.33 | °F |
| Melting Point | 1690 | 1710 | K | 2582.33 | 2618.33 | °F |
| Minimum Service Temperature | 0 | 0 | K | -459.67 | -459.67 | °F |
| Specific Heat | 505 | 525 | J/kg.K | 0.390798 | 0.406276 | BTU/lb.F |
| Thermal Conductivity | 12 | 15 | W/m.K | 22.4644 | 28.0805 | BTU.ft/h.ft2.F |
| Thermal Expansion | 0.5 | 2 | 10-6/K | 0.9 | 3.6 | 10-6/°F |
| Breakdown Potential | MV/m | V/mil | ||||
| Dielectric Constant | ||||||
| Resistivity | 75 | 85 | 10-8 ohm.m | 75 | 85 | 10-8 ohm.m |
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70