Copper Nickel suppliers
Cupro Nickel Price Per Kg in India
Dealers & distributor of Copper Nickel Grades, Copper Nickel Alloy, Cuni Material Grades in UK, UAE. Check Copper Nickel seawater corrosion
Table of contents
- Copper Nickel Alloy Suppliers
- Cupro Nickel Price Per Kg
- Copper Nickel Specification
- Copper Nickel Alloy Properties
- Cupronickel Uses
- Equivalent of copper nickel grades
- Why copper-nickel is required in Navy?
- Why copper-nickel is required in Navy?
Copper Nickel Alloy Suppliers
Copper Nickel Grades Suppliers in Mumbai, India
Copper Nickel Pipe
Copper Nickel Tube
Copper Nickel Tubing
Copper Nickel Sheet
Copper Nickel Plate
Copper Nickel Round Bar
Copper Nickel Wire
Looking to buy Alloy 600 Tubing? Inconel 600 Tubing?
Looking for Copper Nickel suppliers in UK, UAE, Singapore, Australia, South Africa or Indonesia? Your single source for all types of Copper Nickel Grades.
| Copper Nickel Price | Origin | Price in INR (per kg) | Price in USD (per kg) | Price in Euro (per kg) |
|---|---|---|---|---|
| Copper Nickel Price in India | Indian | Rs 560 – 570/- as per your requirement size | $7.95 | €6.94 |
| Cuni Material Price in Japan | Japanese | Rs 650 – 660/- as per your requirement size | $9 | €8 |
| Cupro Nickel Price in UK / Europe | European | Rs 850 – 860/- as per your requirement size | $12 | €10 |
| Copper Nickel Price in USA | USA | Rs 1000 – 1100/- as per your requirement size | $14 | €12 |
Cupro Nickel Density & Price per KG in India
With reference to Cupro Nickel Density & Price per KG in India, the Density of Copper-Nickel is 0.323 lb/in³ (8.94 g/cc). Cupro Nickel price per kg in India is Rs 560. That means that the price of Cupro Nickel per kg would be roughly around 6.30 Pounds. Of course, this would not mean that Cupro Nickel would be available at this very same price in other parts of the globe such as USA, Singapore, China, Japan, Europe, UK, etc. For instance, the price of Cupro Nickel is roughly 5% higher in India, than it is in China. Yet, you could buy Cupro Nickel in India, for 35% lesser than you could buy it in America. Also, the price of Cupro Nickel is always fluctuating.
Copper Nickel Specification
Copper Nickel Product | Specification |
|---|---|
Bar | ASTM B122, B151, MILITARY MIL-C-15726, SAE J461, J463 |
Bolts | ASTM F468 |
Electrode, Welding | AWS A5.6, MILITARY MIL-E-22200/4 |
Nuts | ASTM F467 |
Pipe, Seamless | ASME SB466, ASTM B466 |
Pipe, Welded | ASTM B608, B467 |
Plate | ASTM B122, MILITARY MIL-C-15726, SAE J461, J463 |
Plate, Clad | ASTM B432 |
Plate, Condenser Tube | ASME SB171, ASTM B171, SAE J463, J461 |
Rod | ASTM B151, MILITARY MIL-C-15726 |
Screws | ASTM F468 |
Sheet | ASTM B122, MILITARY MIL-C-15726, SAE J463, J461 |
Strip | ASTM B122, MILITARY MIL-C-15726, SAE J461, J463 |
Studs | ASTM F468 |
Tube, Condenser | ASME SB111, ASTM B552, B111, MILITARY MIL-T-15005, SAE J463, J461 |
Tube, Finned | ASME SB359, ASTM B359, MILITARY MIL-T-22214 |
Tube, Seamless | ASME SB466, ASTM B466, MILITARY MIL-T-16420 |
Tube, U-Bend | ASME SB395, ASTM B395 |
Tube, Welded | ASME SB543, ASTM B543 |
Wire | MILITARY MIL-C-15726 |
Copper Nickel Alloy Properties
Specified Minimum Properties
ASTM B111 Copper & copper alloy
Temper | Code | 0.5% Proof Stress | Tensile Strength | Elongation |
|---|---|---|---|---|
MPa | MPa | % | ||
Annealed | O61 | 105 | 275 | (40) |
Cold Drawn | H55 | 240 | 310 | (10) |
Copper Nickel Physical Properties
Property | Metric Units | Imperial Units |
|---|---|---|
Melting Point (Liquidus) | 11,500°C | 21,000°F |
Melting Point (Solidus) | 11,000°C | 20,100°F |
Density | 8.94 gm/cm³ @ 20°C | 0.323 lb/in³ @ 68°F |
Specific Gravity | 8.94 | 8.94 |
Coefficient of Thermal Expansion | 17.1 x 10 -6 / °C (20-300°C) | 9.5 x 10 -5 / °F (68-392°F) |
Themal Conductivity | 40 W/m. °K @ 20°C | 23 BTU/ft³/ft/hr/°F @ 68°F |
Thermal Capacity (Specific Heat) | 380 J/kg. °K @ 20°C | 0.09 BTU/lb/°F @ 68°F |
Electrical Conductivity (Annealed) | 5.26 microhm?¹.cm?¹ @ 20°C | 9.1% IACS |
Electrical Resistivity (Annealed) | 0.190 microhm.cm @ 20°C | 130 ohms (circ mil/ft) @ 68°F |
Modulus of Elasticity (tension) | 140 GPa @ 20°C | 20 x 10 6 psi @ 68°F |
Modulus of Rigidity (torsion) | 52 GPa @ 20°C | 7.5 x 10 6 psi @ 68°F |
Environmental Properties | |
|---|---|
Resistance Factors | |
1=Poor 5=Excellent | |
Flammability | 5 |
Fresh Water | 5 |
Organic Solvents | 5 |
Oxidation at 500C | 3 |
Sea Water | 5 |
Strong Acid | 2 |
Strong Alkalis | 5 |
UV | 5 |
Wear | 5 |
Weak Acid | 4 |
Weak Alkalis | 5 |
ASTM B111 Copper & copper alloy
Temper | Code | 0.5% Proof Stress | Tensile Strength | Elongation |
|---|---|---|---|---|
MPa | MPa | % | ||
Annealed | O61 | 105 | 275 | (40) |
Cold Drawn | H55 | 240 | 310 | (10) |
Copper Nickel Physical Properties
Property | Metric Units | Imperial Units |
|---|---|---|
Melting Point (Liquidus) | 11,500°C | 21,000°F |
Melting Point (Solidus) | 11,000°C | 20,100°F |
Density | 8.94 gm/cm³ @ 20°C | 0.323 lb/in³ @ 68°F |
Specific Gravity | 8.94 | 8.94 |
Coefficient of Thermal Expansion | 17.1 x 10 -6 / °C (20-300°C) | 9.5 x 10 -5 / °F (68-392°F) |
Themal Conductivity | 40 W/m. °K @ 20°C | 23 BTU/ft³/ft/hr/°F @ 68°F |
Thermal Capacity (Specific Heat) | 380 J/kg. °K @ 20°C | 0.09 BTU/lb/°F @ 68°F |
Electrical Conductivity (Annealed) | 5.26 microhm?¹.cm?¹ @ 20°C | 9.1% IACS |
Electrical Resistivity (Annealed) | 0.190 microhm.cm @ 20°C | 130 ohms (circ mil/ft) @ 68°F |
Modulus of Elasticity (tension) | 140 GPa @ 20°C | 20 x 10 6 psi @ 68°F |
Modulus of Rigidity (torsion) | 52 GPa @ 20°C | 7.5 x 10 6 psi @ 68°F |
Environmental Properties | |
|---|---|
Resistance Factors | |
1=Poor 5=Excellent | |
Flammability | 5 |
Fresh Water | 5 |
Organic Solvents | 5 |
Oxidation at 500C | 3 |
Sea Water | 5 |
Strong Acid | 2 |
Strong Alkalis | 5 |
UV | 5 |
Wear | 5 |
Weak Acid | 4 |
Weak Alkalis | 5 |
Cupronickel for Offshore & marine– Salt water pipes and fittings, hot water tanks, salt water baffles, propeller sleeves, valve and pump components, flanges, boat hulls, marine fittings and marine hardware
Copper nickel uses in Chemical processing- Heat exchanger and cooling plant, evaporator tubes, pump and valve trim
Other uses of Cupro nickel – Power steering tube, brake lines, condenser plates, pressure vessels and distiller tubes
Copper Nickel seawater corrosion
Comparison of Copper Nickel alloy corrosion resistance
CuNi10Fe and CuNi30Fe seawater corrosion (in Heat Exchanger Service)
Environmental Conditions | Type of Corrosion | Service Experience | |
|---|---|---|---|
CuNi10Fe | CuNi30Fe | ||
Waterside Conditions | |||
Clean Seawater at velocities up to 1m/sec | Uniform, General | 0.0025-0.025 mm/yr | 0.0025-0.025 mm/yr |
Clean Seawater at velocities up to 3.5 m/sec* | Impingement Attack | Satisfactory | Satisfactory |
Polluted Seawater | Accelerated General & Pitting | Less Resistant | Preferred but not immune |
Entrained Sand in Seawater | Accelerated General & Erosion | Unsuitable, except in mild conditions | Use CuNi30Fe2Mn2 |
Accumulated Deposits on Surface | Local Attack | Generally Good | Tendancy to Pit |
Hot Spots due to Local Overheating | Local Attack by Denickelification | Good | Good but some failures in extreme conditions |
Corrosion Plus Stress | Stress Corrosion | Very Resistant | Very Resistant |
Vapour Side Conditions | |||
Feedwater Heaters working under cyclic conditions | Exfoliation Attack | Resistant | Susceptible |
Non-condensable gases † | Local Attack & General Thinning | Highly Resistant | Most Resistant |
Hydrogen Sulphide in Desalination Plant | General Attack | Less Resistant | Resistant ‡ |
Comparison of the mechanical & physical properties of copper, important copper and unalloyed steel
| Material group | Expansion coefficient [10-6 / K] | electrical conductivity [m / (ohm * m ^ 2] | Thermal conductivity at 20 ° C [W / m * K] | 0.2% strain limit Rp0.2 approximately [N / mm ^ 2] | Tensile strength Rm min. [N / mm ^ 2] | Break elongation A min. [%] |
|---|---|---|---|---|---|---|
| Cu | 17 | 60 | 395 | 40-80 | 200 – 250 | Max. 60 |
| CuZn | 18 – 20.3 | 15.0 – 33.3 | 117 – 243 | 60 – 420 | 240 – 460 | 4 – 20 |
| CuNiZn | 16.5 – 17 | 3.5 – 4.0 | 27 – 33 | 270 – 580 | 380-650 | 0 – 9 |
| CuSn | 18.4 – 18.5 | 7.5 – 10 | 67-85 | 220 – 550 | 330 – 620 | 0 – 5 |
| CuNi | 14.5 – 17.6 | 2.04 – 6.4 | 21 – 48 | 90 – 500 | 280 – 560 | 0 – 14 |
| CuAl | 17.0 – 18 | 5 – 10 | 40 – 83 | 110 – 680 | 350 – 830 | 0 – 25 |
| Steel, unalloyed | 12 | 5.5 – 7 | 48 – 58 | 175-355 | 290 – 630 | 18-26 |
Nickel Copper Fouling Resistance in Quiet Sea Water compare to Various Alloys
| Arbitrary Rating Scale of Fouling Resistance | Materials | |
|---|---|---|
| 90-100 | Best | Copper |
| 90/10 Copper Nickel Alloy | ||
| 70-90 | Good | Brass & Bronze |
| 50 | Fair | 70/30 Copper Nickel Alloy |
| Aluminium Bronzes | ||
| Zinc | ||
| 10 | Very Slight | Monel 400 (Nickel Copper Alloy) |
| 0 | Least | Carbon and Low Alloy Steels |
| Stainless Steels | ||
| Nickel Chromium Molybdenum Alloys | ||
| Titanium | ||
Equivalent of copper nickel grades
| Alloy Name | BS | UNS | BS EN | Others |
|---|---|---|---|---|
| Copper Nickel 90/10 | CN102 | C70600; C70610 | CW352H | 2.0872 |
| Copper Nickel 70/30 / NES 780 | CN107 | C71500; C71520 | CW354H | NES780 |
| DEF STAN 02-835 | C72420 | DGS357 | ||
| NIBRON SPECIAL® | DTD900/4805 | C72400 | 2.1504 | |
| DTD498 / BSB25 | DTD498 | C64700 | CW111C | BSB25 |
| COLSIBRO® | DTD498 | C64700; C18000 | CW111C | 2.0855 |
| TROJAN | C70250; C70252 | CW112C | 2.0857 | |
| Beryllium Copper (BECOL-25) | CB101 | C17200 | CW101C | ASTM B196; CDA 17200 |
| CHROMZIRC-3 | CC101 | C18200 | CW105C | BS 4577 A/2/1 |
| CHROMZIRC-328 | CC102 | C18150 | CW106C | BS4577 A/2/2; ISO5182 |
| COLDUR-A® | CS101 | C65500; C65600 | CW116C | ASTM B98; ASTM B249 |
| COLDUR-B | C65100 | CW115C | ASTM B98 |
Why copper-nickel is required in Navy?
The reason why copper-nickel is required in Navy is because it shows excellent corrosion resistance to sea water, it has low macrofouling rates and it also has superb fabricability. As copper-nickel is resistant to sea water, it is used in hulls, propellers and crankshafts of fishing boats, tugboats, working boats and other types of boats. Copper-nickel is also used in marine hardware and in seawater system condensers.
Where are copper-nickel scrap buyers & why?
The answer to where are copper-nickel scrap buyers & why, is that there are scrap buyers of copper-nickel located all over the globe. The reason for this is because there is a huge demand for copper-nickel all over the world, as it is used in many applications and industries. Copper nickel scrap plays a very important role in many different kinds of industries, all over the globe. Also, there is a lot of money to be made from selling and trading in copper nickel scrap. This is why there are so many sellers and traders of copper nickel scrap today, selling this kind of scrap, in all parts of the globe.
ASTM Specifications
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
|---|---|---|---|---|---|---|---|---|
| B167 | B517 | B163 | B516 | B168 | B166 | B564 | B366 |
Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material
| Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
|---|---|---|---|---|---|
| Rod & Bar | Cold-Drawn | 80-100 | 25-50 | 35-55 | 65-85 |
| Rod & Bar | Hot-Finished | 80-100 | 30-50 | 35-55 | 65-85 |
| Tube & Pipe | Hot-Finished | 75-100 | 25-50 | 35*55 | – |
| Tube & Pipe | Cold-Drawn | 80-100 | 25-50 | 35-55 | 88 Max |
| Plate | Hot-Rolled | 80-105 | 30-50 | 35-55 | 65-85 |
| Sheet | Cold-Drawn | 80-100 | 30-45 | 35-55 | 88 Max |
Inconel 600 Temperature Range
Inconel 600 temperature range is such that it can be used from cryogenic temperatures to temperatures ranging between 1093 °C (2000 °F). Inconel 600 material is most commonly used in structural engineering because it is perfect for high temperatures above 1000 °F (540 °C). Inconel 600 is durable, stable, strong and corrosion resistant. Inconel 600 is also called a super alloy, because of its intense characteristics, such as performing under tremendous mechanical stress and temperatures and showing resistance against oxidation and creep. Inconel 600 (UNS N06600) is also used in heat treatment furnace components and fittings, heat exchangers, etc.
Inconel 600 Melting Point
Inconel 600 melting point lies between 2470 – 2580 °F (1354 – 1413 °C). The Thermal Conductivity of Inconel 600 is 103 BTU-in/hr-ft²-°F (14.9 W/m-K). The Liquidus of Inconel 600 is 2580 °F (1413 °C). Inconel 600 Solidus is 2470 °F (1354 °C). The Specific Heat Capacity of Inconel 600 is 0.106 BTU/lb-°F (0.444 J/g-°C). The Curie Temperature of Inconel 600 is -317 °F (-194 °C). Inconel 600 Elongation at Break is 45%. The Elongation at Break of Alloy 600 at Elevated Temperature is 42%. The Electrical Resistivity of Inconel 600 is 0.000103 ohm-cm. Inconel 600 Magnetic Permeability is 1.01.]
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Alloy 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Alloy 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Whats new:
- Alloy 600 Pipe supplier
- Alloy 600 Tube supplier
- Alloy 600 Tubing supplier
- Alloy 600 Plate supplier
- Alloy 600 Plate supplier
- Alloy 600 Round Bar supplier
- Alloy 600 Pipe Fittings supplier
- Alloy 600 Forged Fittings supplier
- Alloy 600 Flanges supplier
- Alloy 600 Fasteners supplier
- Alloy 600 Nuts supplier
- Alloy 600 Bolts supplier
- Alloy 600 Wire supplier
- Inconel 600 Seamless Pipe supplier
- Inconel 600 Welded Pipe supplier
- Inconel 600 Seamless Tube supplier
- Inconel 600 Seamless Tubing supplier
- Inconel 600 Coil supplier
- Inconel 600 Strip supplier
- Inconel 600 Foil supplier
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70